The Brooks Long Term Review

This will be a work in progress for my Brooks saddle that I installed on the LHT in 2019. I will do a review at 250 km now. I will do another at 1000 and then at 5000 km. 

Why I Bought The Brooks

I grew up, like any other Indian in the 70s, on a leather saddle that every single bicycle in our country donned in those days. We never knew that bicycles could come in any other type of saddle. Of course as a child, my tricycle had a plastic seat that had turned white being exposed to the sun forever.  Some time in the 80s the non-leather saddles (we always calledthem seats) became fashionable and then a norm. Only poor people rode on leather or perhaps more correctly leather like saddles. 

When I bought the new bike Merida Scultura it came with a normal narrow saddle. I guess these are PU material. It wasn't uncomfortable. But once I started researching on touring cycles I inevitably learned about Brooks and its legacy. I immediately identified with it and understood how our saddles of childhood were all replica Brooks. Of course I wanted a Brooks. For the legend that it is. I got it brought for me when Guria came to India for a visit and installed it on my LHT right away. 

Before the first ride I treated the saddle with the Proofide that came gratis with it in a small sachet. I also got Raja to bring a tin of Proofide for me from England for future use. The initial few days on the Brooks were hard, I must confess. But I remembered all our childhood and boyhood saddles which were never comfortable. We would often buy a plastic cover with thick foam padding inside. I cannot say they reduced the discomfort in any way. 

But somewhere along the line, perhaps after 6/7 short rides the saddle became less uncomfortable. Now that I have done more than 250 kms with it, I guess the initial breaking in period is over. I do not feel it is hard. I cannot say it is soft or squishy. But there is a certain flex in it that I like. Very subtle flex. Not a loud spring but just a wave. I quite love the saddle now.

Today for the first time it rained as I had gone out with the bike (basically to sell the Cateye Velo 7 to a Howrah guy called Nabin Haldar). As we were chatting near the Victoria it started raining. After a few drops on the saddle I realised it was exposed and immediately reached for the black plastic under the saddle. It had dropped off somewhere because Monisha gave me a new one today and loosely stuck it under the saddle. I should have tucked it between the rails. Then I realised I had the plastic carry bag in which I brought the Velo7. So I put it as a cover and even rode over it even though it wasn't raining any more. But before putting the cover I used my hand towel to wipe the saddle and soak the water up.

I am not sure if it got a darker tan after this but I love the colour as it is now. It's a little darker than when it first came. 

I must add two things here. In the first year of its existence atop my LHT frame I did not ride a lot. The cycle was as good as lying idle in my living room. This possibly resulted in rusting of the rivets. My rivets are not copper rivets but steel and some of them have rusted. I am not too worried about that. It's okay. I am not sure if Brasso is necessary as it might do more harm to the leather than do any good on the metal. So I am allowing it to get that coating of oxidation. If it rubs off with my bum fine. Otherwise I can live with it. 

I will write the next review after I finish 1000 km on it. I might go for a coat of Proofiding at 500. The Calcutta monsoon is on right now and everything is so damp here.

5th July, 2020 - The First Seat Marks Appear At 432 Km - Today, while on a trip to Bagbazaar with Mezda I realised my saddle had developed some marks where my bottom puts the maximum pressure. The odo at the end of the day's trip shows 432 km. The saddle is slightly discoloured there with crease like markings, though they are not actual creases. Initially I thought they were marks from my sweat. The other day while coming back from work I sweated like a pig and my trousers and shirt were soaking wet with my sweat. So I wouldn't be surprised if the saddle also took up some sweat from there. But on closer inspection they don't seem to be water marks. They look more like pressure points.

If you really strained your eyes you could see the marks in this image near the last and first rivets at the two sides. There is a similar mark near the top first rivet also. The saddle, I suppose, is gradually adapting to the shape of my bottom. This is what it is supposed to do and the reputation is precisely for this. I have no complaints against it in terms of it being a "pain in the butt". It is not. Super comfortable? Not yet. But cycle saddles are not supposed to be your drawing room sofa where you sink in.

I think I will Proofide it once at 500 km, which I expect to hit sometime towards the end of this week. It should hopefully improve things further. But the weather has been very damp of late. So whether it is the right time to Proofide the saddle is something worth thinking about. But then these saddles are born in England which is not known for being sunny. So let me see. 

Saturday July 11, 2020 - Today the saddle touched 500 kilometers. Tomorrow being Sunday I plan to go out again and then I will Proofide it once because Monday I have to take the car out in the morning as Monisha plans to go to work as well (when the two of us go out we take the car out). 

So how has the saddle been so far. It's great. I bought it for the legacy, as I said. Comfort is a side benefit :-). But it indeed is getting more and more comfortable. As I said I don't weigh much and I do a lot of exercise trying to stay fit. Therefore my glutes, I think, are less prone to pain. The saddle is gradually taking the shape of my butt. I can see new contours emerging and colour changes in certain places of the saddle. I think it is a matter of time before it takes the shape of my backside. I am waiting rather curiously for that to happen and see how it improves comfort. I don't wear padded shorts. And I am fine with the Kappa track pants. Tomorrow I might go out in my golf shorts though. 

Proofiding At 500 Km Today Sunday, July 12, 2020 I applied Proofide to the saddle for the second time. The odo is showing 560 km actually. More importantly it's been one year since the saddle was installed. I love the lovely tan colour that came out after it dried up. There were some bits that were not drying. I buffed it gently all over the saddle with a micro-fibre cloth. It looks a very luscious dark tan now. I am not sure when I will apply the next coat of Proofide. Perhaps next monsoon. 

Brooks At 1000 Km - Today, Thursday 3rd September 2020, the Brooks B-17 completed its 1000 Km. It was 798 on the odo when I reached home from work. Add the 200 Km I had already recorded before installing the Edge 130. So it was 998 Km after that ride and therefore it would've hit 1000 near Bhatikhana Morh when I was going to see Maa later in the evening. I am not counting the two rides I did without counting the kilometers when my battery had run out.

The saddle has finally started taking the shape of my bottom, particularly where the left sit bone sits on the saddle. It is quite pronounced I can see. I have a feeling the long 9 and a half hours spent on the saddle on Saturday during our Canning trip has done this. I noticed this new development today. Does it mean I exert more pressure with my left leg and sit more on the left bum than the right? I don't know.

Whatever it is, the seat is now super comfortable. The Canning trip is a case in point which proves this beyond an iota of doubt. I went wearing ordinary shorts with a pair of very regular briefs underneath. Nothing happened to my glutes. A little stiffness after the ride but that was gone after the afternoon siesta. The legs were more affected, to be honest. 

Now I understand why people vouch for the Brooks so wholeheartedly, particularly the tourers. The only hassle with the saddle is to remember that it is leather and requires protection from water. I keep a plastic grocery bag under the saddle and use it whenever there is a semblance of any rain. For deep cleaning days I cover it with a similar plastic bag or take the saddle off along with the seat post. Of course I have to cover the seat tube with another piece of plastic.

I think I will take another look at the seat once it hits 5000 Km. I hope it is soon :-) If I do one century  ride every week I could hit the figure in another twelve months or less. Let's see.

From today I am going to keep tab on the Brooks mileage through the Garmin Connect app where I have added it as a gear. Whatever the total mileage is I have to add another 1000 Km to it. This is so because now I want to use the Edge 130 on both LHT and the Red Roadie.

September 19, 2020

Today being a Saturday I went out on a long ride to Dankuni. I had thought it would be a 100 km trip but it turned out to be just above 76 km because I took the Kona Expressway to return. It's a much shorter distance by that route. But that is not the point. 

The point is, I went on my Red Roadie with the Shimano Probiker Griffon saddle and not my Brooks. I could understand today how comfortable my Brooks is. The total saddle time for me was about 5 hours. My butt was hurting from around 3 or 3.5 hours. I love my Brooks all the more now. 

Garmin Edge 130 Impressions

Today is Saturday, 13th June 2020. I just brought home the Garmin Edge 130 from Nikita Distributors. It's a small box really. Smaller than any mobile phone box. 

About the Unit

Software Version 3.60 

(13427f0) 

Unit ID 3978212180

GPS 2.50

Sensor Hub: 5.80 

(The above details were noted down from the about section of the unit on 9th July 2020)

What's In The Box

The unit, a pack containing two mounts with two rubber gasket like things to work as a layer between the handle bar and the mount, 4 smaller rubber bands and four larger bands to connect the mount to the bar, then there is the charging and computer connecting USB cable, a string to attach to the unit and a quick start manual book presumably detailing how to use the unit (the main users' manual has to be downloaded from their website). There are some stickers also inside the book. I am going to keep all these packed in the box it came in and keep the box in the dining room cupboard.

The First Steps

After unboxing I  powered it up by charging it from my computer and then connected it to my smart phone - I think the technical term is pairing. The unit offered a number that had to be keyed into the phone. The rest of the steps were pretty much clicking the "next" tabs. I synced it to the computer as well. To do that you need to keep the unit connected to the computer through the USB cable.

I had Garmin Express and Connect downloaded in both my computer and the phone (I have been using the Forerunner 15 for a few years now). While the phone wanted to know my location, the computer did not ask for anything like that. The phone's location and bluetooth have to be on to use certain phone oriented features like weather report (good for touring if there is internet connection everywhere). The unit automatically uploads the data to the phone after a ride is completed if there is bluetooth connection. I don't know if the internet also has to be on for automatic upload of data.

While uploading data from my Forerunner 15 to the computer it is not enough to just connect the two. The internet must be on.

Internet and bluetooth has to be on when a completed trip is uploaded to the Connect app. It can be done at any point of time after the ride. If there is no internet for a long time then uploading GPX files from the unit into the computer may be considered to free up memory space in the unit. however, on a trip this will involve taking the computer along, which may not be viable. 

Pairing the unit with the phone or the computer was super easy. Just follow the steps suggested. Keep the bluetooth of the phone and computer on when you are doing this.

When the unit was first connected to Connect it learnt about me and my cycling accomplishments from the app and kept it stored in the unit. So the unit now knows my height, weight, maximum cycling distance etc. These were there in the Connect app from my earlier rides and the unit copied them into my profile. If you are using Connect for the first time the profile data will have to be keyed in. 

Just out of the box

As of now I have not used the unit. It is getting charged. Possibly the charge is full because the battery icon is showing full and not bouncing. In fact at some point in time in future I will have to find out how long it takes to fully charge the unit from zero. 

I ejected the unit out of my computer and it says it wants to update the software. The one that is installed 2.40. It wants to update it to 3.60. So I chose to "instal now". These firmwire updates are important to do. 

My First Impressions (Even Before First Ride)

It's very small. More or less the same size as the Cateye Velo that I have, which is a wired meter. The small size could be an advantage but having gotten used to large screen mobiles we find these small units a little disappointing perhaps. 

The unit's buttons need hard pressing, as opposed to the Forerunner 15 which is just feather touch. The buttons here are really hard. Will they ease up? I doubt. The unit cannot be switched off when connected to the computer. Incidentally it does not come with a charging unit/pod like the Forerunner does. Just a USB charger. Even that is difficult to pull out. You have to really pull hard to pull it out completely off the unit. It's a little scary that I might break something. It could have definitely been smoother. I hope the connector stays good. 

I think I also missed that it is not a touch screen unit. We are so used to touch screens. But then that would have meant spending a lot more money - almost double. I am okay with pressing hard buttons

As of now, it is fully charged and I shall go for a spin tomorrow. 

I attached the mount to the handlebar of my LHT and loaded the unit to it. Right now the bike has both the Velo 7 and the Garmin. After I get used to the Garmin I shall remove the Cateye.

My Brooks saddle has 200 km on it and the bike has done 1122 km so far. So, once the odo starts I have to mentally add these figures to it for the true numbers. 

I couldn't see the place for the odo. I believe it is visible once it starts rolling. We shall see all these tomorrow.

I discovered that to view Strava Live Segments you need to be a premium Strava member. I guess that will either have to wait or might never even happen.

14th June, 2020 - 11.45 am

It's raining since morning and I am waiting impatiently for the first test run to begin. I am even wearing my heart rate monitor and waiting with my track pants and t-shirt on. The socks are ready. The moment it stops I go out but doesn't seem that is going to happen any time soon. 

I had meant to go towards Gol Park and take a call after reaching there. But all that has to wait now :-(

First Ride

I finally did manage to go out for a short ride. Basically to test the unit out. Just a lazy roll to Golpark and back. Here is a link to the Connect page of the particular ride.

I had forgotten to set the unit to metric system last night. So on the road it was showing me distance, speed etc in miles because that's its default setting. I corrected that after the ride and Connect is showing the distance etc in kilometers. History is also showing it in kilometers. The HRM didn't connect but that is possibly due to a dead battery. Because I came home and found it wasn't pairing with my Forerunner either. Will try changing the battery and see later. 

Note - the battery in the HRM was replaced and it got connected the moment the two were kept in close proximity. The unit sought permission before pairing with the HRM. The HRM is ANT protocol unit that came bundled with the Forerunner 15. 

Note 2 - Last night went for a 12 km ride to Buro's with the hrm strapped. It worked perfectly.  

I had kept the phone's bluetooth switched off. A little before ending the ride I turned it on. When I finished the ride it automatically uploaded the data to my Connect. There is no provision to edit the title of the activity. It just said Kolkata Ride or something like that. Connect is showing the temperature during the ride, presumably collected from the phone.

(15th June Note - On the way to office I had kept the bluetooth switched off. After the bluetooth and internet was connected, which was well after finishing the activity, the ride was uploaded. Of course the machine would also have to be on. After the upload they give you a message saying your ride is ready to view.)

Back at home I also customised the display of the unit. By default it was displaying distance, time and speed only. I guess I put things like odometer on top, speed, average speed, heart rate etc. I cannot remember. Am I happy? Yes more or less. It's just a matter of time before I get used to it. 

I guess I will have to find a buyer for the Velo 7.

Laps

I guess auto lap is 5 km for this unit. For the Forerunner it is 1 km. There are two options - auto lap on or off. I think it was in default mode of auto lap off. I turned it on. Let me see what happens tomorrow. 

New Learning on 15th June - The toggle switch The auto lap has to be turned on or off with a toggle switch whose meaning is difficult to understand. It is a blank small vertical bar with rounded corners and a black dot. Whether the dot on top means on or off is something one as to find through trial and error. It took me a lot of net search to finally learn that the dot on top means it is on. Intuitively I thought the dot at the bottom means it is on because that is how and electrical switch works. In fact, that the switch is known as a toggle switch was the first thing I had to learn. I found the final answer, or even this issue being discussed, in reddit. I don't know why this simple thing is not mentioned somewhere in the manual. It is not a universal symbol or icon.

While on the subject of auto lap - this unit can be used to manually mark your laps. For example, I could mark a lap up to Ruby and from there to Science City as another lap to understand how I perform in the city and outside.

15th June 2020 - The second ride was this morning while coming to work. I somehow did not realise the ride was not switched on. So I switched it on after about a kilometer. Therefore the odo reading is 1 km less than what it actually is. Rest everything was fine. I have customised the display to show the odometer on top, distance, speed, average speed and heart rate. This somewhat mimics my car's odometer. I would have loved to have the time of the day displayed somewhere. But I guess it does not show it anywhere.

I think I will write a one month report after this when I get to understand the unit better. I take my own sweet time to understand these modern machines. I must remember to get a battery for the hrm this evening. 

New Edge 130 Plus Launched - The moment you buy a new electronic gadget it becomes obsolete. This saying was proven right last night once again when I read the news about the launch of a new Edge 130 plus in the US. I believe battery hours have come down from the official 15 to 12 hours. Therefore it would have not attracted me in any case. I think Garmin is trying to position this model as an MTB computer because the additional features are more for mountain bikers. In fact I couldn't even understand what those new features mean. 

The mounting position - Having removed the Velo 7 from the stem last night (I have put it up for sale and found a buyer in Howrarh for Rs 800) I placed the 130 on the stem, oriented in a vertical manner (the Velo was turned 90 degree to the left) and went for a ride to Buro's. Did it principally to look cool :-)

Now the readability of the unit suffered because the stem is a little inclined so the 130 is offering a slanted view. The digits in the bottom line weren't so clearly visible in the night while riding. I will see how it goes in the morning and then decide whether the stem is the right place for the unit. I would love to put it on one of those extended arm mounts. They look uber cool.

I have checked this during the morning now and readability is fine. 

Live Tracking - This evening I had gone out with the bluetooth, location and internet on, meaning to see how Live Tracking works. I set up the email as mine. Upon return I realised no email had come. I had forgotten to switch on Live Tracking before starting. Now I have set it to automatically always send me live tracking whenever I undertake an activity. So, let me see what happens tomorrow when I go to work.

I have set it to automatically send me and Monisha email of my ride. What happens is a link is sent which is clickable during the ride and you can see/follow my ride live. I am yet to see it. This link becomes inactive once the ride is completed and the data is uploaded to Connect. So unless I click it mid-ride I will never be able to see myself. 

Few Quick Observations

There is some battery loss even when the unit is switched off. Self discharge. Not very high but it is noticeable. Once turned on, the battery indicator shows one or two bars less. They come back on after some time. The battery management system is not the best. While charging I do not even know when it is full. (Added later - the power icon gets changed to a battery icon with five solid bars, each representing 20 per cent)

But one can download free third party apps from the IQ Connect stores. I intend to download a battery management widget and see how it goes. I want to know the detailed pros and cons of downloading such apps. 

I have quite got used to the small size of the unit. In fact I love the cute little size. The on-off switch does not seem as hard as it did initially. The charging cable still needs a little pulling to take it off the unit. The unit moves smoothly on the mount and clicks perfectly. I do not know if I got used to the unit or it's the other way round. 

June 26, 2020

IQ App Store I downloaded a third party battery related app called Battery Up Down. It is now a data field in my unit. I created a separate page for it where it shows an icon as well as number in per cent. For example, right now it is showing as 20 per cent. On the Connect website, the battery performance during the ride is also shown I wonder how accurate it is. 

On the Garmin Connect website, when seen through the computer, a separate chart also gets displayed like they show the elevation, speed, heart rate, temperature etc. It is definitely not correct. For example, today's ride shows 40 per cent for most of the ride with two points where it had dipped to 20 per cent suddenly for a few seconds. On the unit though it shows as 20 per cent. Last night it came down from 40 to 20 after the ride. But today it continues to show 20. So, I really don't know how useful it is. But it takes an insignificant space in the unit. 

The Garmin Connect website shows that this is one of the apps downloaded by this unit. 

I downloaded it through the phone. I opened the Garmin IQ app store (downloaded from Google Play Store) on my phone. The IQ app store is like the play store of Google but only for Garmin related third party apps. From this IQ app store I downloaded the Battery Up Down app and it got transferred to the unit through Bluetooth. Nothing very complicated, if you have ever downloaded any app for your phone.

For downloading through the computer you have to connect the unit to the computer. Because the computer bluetooth does not connect with the unit. 

Do I want any other app? As of now, no. I have a feeling they eat up battery. I am a little paranoid about battery. Because in India, in the remoter places, there is hardly any electricity in many places. Of course I have the Anker solar charger. But even then it is always safer to conserve as much power as possible.

Live Tracking

Edge 130 comes with a feature that is increasingly becoming very popular with a lot of such units. It's called Live Tracking. You can nominate a few email ids where a link would go from Garmin as soon as the ride starts. Clicking on this link, one can see your movement on a Google map. This can be an important peace of mind kind of thing for your family when you are out cycling. 

However, there are certain practical difficulties to get this working and I had to get it right after making many many minor errors. A. This is literally a live feature. That is, the link is active only when the activity is on. The moment it is finished the link stops working. So if you really want to know where I ended my trip you have to be continuously glued to the screen. But yes the screen is indeed live. You can actually see the blue line moving. B. At the time of starting the activity your internet has to be on. If there is no connectivity where you start then there is no live tracking even if internet comes on some time later. C. If for whatever reason the connectivity is gone somewhere in the middle of the trip, the live track cannot be seen after this. 

Odometer Cannot Be Manipulated

The other day battery died out while I was riding to work. The ride was finished at .80 Km. I know the exact distance from home to work. So I corrected the distance in the Connect app. The ride in the unit was still showing .80 Km. I thought once the unit connected to Bluetooth it would rewrite the distance in the odo and correct the ride in its own memory but it did not. Apparently once a ride is recorded it cannot be changed in any way. Therefore my odo is actually showing a distance of 2.8 km less. Not a big deal but have to remember to charge the unit before a long trip. I want my odo to give as correct a picture of my total distance as possible. I will celebrate the landmark distances when they are reached. For example, 5K will be a landmark to achieve. 

Syncing Issue - 9th July 2020

Today I faced some syncing issues with the unit. After coming to work, riding 3.56 km in 14 minutes, I found the unit had not synced. Opened the Connect app and found it is written that the servers are undergoing maintenance and asked me to check back. 

After a few hours that maintenance notice was gone but I find the unit is not syncing with the phone. The two are connected. I can even see the phone notices on the unit. It is showing all the signs of syncing but ultimately the data transfer is not happening. I cannot see my activity listed in the mobile. I believe I will have to do this by directly linking the unit to my computer through the Garmin Express application. But this problem needs to correct itself. It means I will not be able to upload the data while travelling/touring. 

I am hoping this is just a temporary software related problem and it will correct itself shortly. I have had similar issues with the Forerunner in the past. That was quite scary but it solved itself. 

I asked Nishant whether he could sync his unit an Edge 830 bought almost as the same time as me. He said he was having similar problems with syncing for a few days and has been syncing directly through the computer. Now I joined the club. Let me see how long this continues. I have asked the facebook forum about it, if someone else is facing similar problems. 

Speed & Cadence Sensors - Odo - 675 - 25th August, 2020

Yesterday I got for myself a set of speed and cadence sensors for my Edge 130 from Exad Sports for Rs 4900. They were installed right away on the LHT and I even went for a 10 km spin with them. Syncing them with the unit was very easy. With the unit close by and switched on you have to rotate the sensors one by one as if they were on the crank arm or the hub and the bike is in motion. They synced readily. I created a special page for them on the Edge 130. It's an eight field page with all sorts of data being there like cadence, average cadence, lap cadence etc.

I actually want to improve my cadence over time. The best way to do that is to see what the cadence actually is and then work on it. I think I will ultimately install them on the training bike Merida and spare the LHT. My normal leisurely cadence is 45 on the 7th gear. I want to exercise at 70 and then move on to 90. Question is on which gear? Let me see.

The speed sensor can either automatically decide the wheel size or it can be manually keyed in. I let it decide automatically. Because the actual size is not really 26 inches. It's a little more than that and finding it out is a rather tedious process. Plus, since I will be changing bikes often I kept it on auto mode only.

Milestones and Timelines

List of various items added to the Edge 130 and other important events associated with it

Date	Odo	Remarks
13-06-20	000	Bought unit from ExadSports & installed
14-06-20	000	Went for maiden ride
25-08-20	675	Bought, synced and installed speed and cadence sensors from ExadSports (Rs 4900)

A Pump And a Saddle

After the Darjeeling trip (read about it here), two of the things I knew I will have to invest in were a Brooks saddle and a Lezyne Microfloor pump. The pump was in fact more necessary because my existing hand pump, I knew, was totally inadequate for the job on a 26"x1.75 tyre. 

In fact one of the first things I did after coming back home was put up my Park Tool Half Pint for sale on Cyclop (a popular facebook group for Indian cyclists). It got sold in moments because I had kept a sensible price of Rs 500 plus courier. 

Next I did some research and realised Lezyne had two models of micro-floor pumps for touring. They come with a pipe and didn't need back breaking pumping to inflate 10 psi. One was high pressure, with or without in-line gauge (HPG or HP); the other was for high volume without gauge (HV). Soon I discovered that the HPG was available in India with Starkenn and in fact at a price that is lower than what one has to pay in England. I immediately ordered for it. That was on Tuesday. 

Brooks was available with Bike Affairs, Hyderabad. But I thought I would buy it later. 

After placing the order with Starkenn started the long and arduous wait for the item to arrive. I was told there is some stock audit going on in their warehouse so it's taking time. 

On Tuesday (that is yesterday and a good one week after the order was placed on Starkenn) I got a message from Guria (my niece living in America) saying she is coming in a week or so and if I needed anything. I realised God is there and He really wants me to ride. Or at least spend on cycling equipment. 

By evening, when I still did not hear from Starkenn, I called them up and cancelled the purchase. I had not paid and opted for COD. 

Next I sent two links to Guria asking her to bring the pump and the Brooks saddle. One from Amazon and the other from REI respectively. As far as I know they are priced $85 and $119. So a total of $204. I asked her to get me the high volume pump without the gauge. 

I wasn't sure if space would be an issue for Guria in her suitcase and told her to go only for the pump, if it was. But this morning she confirmed that she is ordering for both.

May 3, 2019

I knew I would need to buy a thing called Brooks Proofide to treat the saddle. Now Proofide is either not available with any of the regular cycle retailer or available at an exorbitant price in Amazon. I realised getting it by courier will be expensive for Guria and work out to be same for me as buying in India. So more research.

Finally I realised it is available for £ 8.99 in Evans Cycles. Further research and a question to Raja showed that their Cardiff store is not very far from Raja's house and close to his daughter's school. So I told him to get it for me. Asking him to get it by courier would be torture on his pocket. Courier charge alone is £ 5 pounds.

Problem with Raja is he does not accept money for such small items. 

So, I am more or less sorted for now.

Sunday May 12, 2019

Guria arrived on Saturday 2.30 am. I went to their house today and brought the saddle and pump home. The total damage is $216 (x Rs 70). It's a little more than I anticipated because she bought the pump with digital gauge, which is the latest model and quite a bit more expensive. I have no clue why she went for this. This is not a subject she would know anything about to use her discretion. Most likely the store didn't have the required model and suggested or perhaps auto suggested this one, which is fine with me.

I promptly went on with the task of working them both out. Here are my first impressions.

Saddle 

Out of the box, my first reaction was - what a beauty ! It's smooth and flawless. Shiny in a dignified way. I read the short literature and referred to a website on how to treat the saddle the first time. They suggested that you lightly spread the supplied Proofide on both sides of the saddle. Rub it off and then ride the next day perhaps. So I did that. Applying it on the underside is not so easy because of the rails. The amount supplied in the sachet is just about right for one application.

It's looking a little matty now. I installed it on the Surly, after taking off the Griffon. Will possibly ride it tomorrow. Can't wait for the morning. The odo on my Cateye shows 922 km.

Monday May 13, 2019 - Went for a 10 km ride this morning. It wasn't so uncomfortable as people make it out to be. At least I couldn't find it any less comfortable than my Probike Griffon.Therefore I can assume that it will get better. The underside of the saddle is still wet from the Proofide I appliled last night. I guess that is how it should be.
Went for 15 more today, May 14th. Didn't expect any major change. I can feel the saddle better now. Once it starts flexing a bit it will be a great saddle. Let me see how soon that happens. I guess it takes at least 500 km. Since I am on the lighter side it might take longer for me. But I am not worried at all. I am fine with it as it is.

Pump 
Nice pump, though I didn't like its shiny colour. Each stroke increases the pressure in the tube (26"x1.5) by 1 PSI. Sometimes it takes 2. The digital gauge is very nice and useful too but it requires a battery (I don't like carrying electronics around in the rough and tumble of multiple day touring life). I pumped it up from 30 to 45 with about 20 strokes. It's not as easy as they show it on youtube, or at least I am not that strong. Quite hard for me but better than the Parktool Half Pint I had. The handle on top could be a little larger. It's too small. I have to figure out how to attach the pump to the frame. Looks like they expect me to sacrifice a bottle cage. No chance, Mr Lezyne. Or is it possible to attach both the bottle and the pump on to the same set of braze ons? Will have to find that out. It might quite be possible.
I love the screw on feature of the nozzle the most. You cannot damage the valve. Presta valves are pretty dainty. I have blown one so far.

Friday Evening, October 11, 2019

The other day there was a discussion on a cycling group on portable pumps and strongly voted for portable pumps with a hose because the tiny ones are really impractical unless you have very strong arms. The discussion prompted me to try the pump on my 700cx23 road bike. It's also a good idea to actually use mechanical things once in a while. Otherwise they get damaged.

I loved the gauge once again. I loved the smoothness of the barrel and the piston. It is definitely easier  than the earlier Park Tool thing that I had (which was really really small) but filling in the 700x23 is a lot harder, particularly after 25 psi. I used a small towel to properly grip and put pressure on the handle. Otherwise the small handle was hurting my palm. I loved once again that you can do the job while standing, as with a proper pump. I did reach 90 psi all right. But I would prefer not to use it at all ;-) With my Park Tool I could barely reach 40 after a lot of struggle.